By GM Ulvi Bajarani, Founder and Head Coach of Azeri Chess Academy.
Two players enter the same event with the same rating. In one format their first opponents are fixed before they arrive. In another, a single draw can change whom they play for the rest of the tournament. Before looking at any pairing table, I ask one question: what determines the next opponent?
| Format | What determines the opponent? | What should the player expect? |
|---|---|---|
| Swiss | Current score, pairing order, and pairing constraints | A new pairing after each round; results do not eliminate you. |
| Round robin | A fixed schedule covering everyone in the section | The whole opponent list is known in advance. |
| Knockout | Position in a bracket or the event’s reseeding rules | Win the match to advance; lose it and leave the championship bracket. |
| Quad | A fixed four-player round robin, usually grouped by rating | Three scheduled games against the other three players. |
| Scheveningen | A rotation across two opposing groups | Play everyone on the other side, but not your teammates. |
| Schiller | A schedule across several opposing groups | Play everyone outside your own group. |
Three decisions are easy to confuse. Pairing chooses who plays whom. Color allocation chooses who has White. Scoring and tie-breaks determine the standings or who advances. They can affect one another, but they are separate jobs.
This guide uses the US Chess rulebook updated for 2026 and the FIDE Swiss rules effective February 1, 2026. The examples are hypothetical unless a specific rule table or historical event is identified. For running the rest of an event, see How to Organize a Chess Tournament.
1. Swiss: US Chess pairing logic
A Swiss gives a large field a fixed number of rounds without requiring everyone to meet. Players normally stay in the event regardless of result. A correctly paired Swiss can still finish with ties, and players on the same final score may have faced different opposition. The familiar 2-to-the-power-of-rounds check concerns how many perfect scores the structure can narrow down under ordinary conditions, not whether the tournament will have an outright winner.
Round one. Rank the entrants using the event’s applicable ratings and assign pairing numbers. In an uncomplicated eight-player section, the upper half meets the lower half in order: 1 vs. 5, 2 vs. 6, 3 vs. 7, 4 vs. 8. If No. 1 gets White in the initial draw, the higher-ranked players on the next three boards get Black, White, and Black respectively. The first number in this opponent-only list is not always White.
Later rounds. Group active players by score, highest first, and rank them within each group. Start with the same upper-half versus lower-half idea. If the natural pairing repeats an encounter, or if the color rules call for an adjustment, try a transposition (reorder one half) or an interchange (move players across the split). Do not assume adjacent ratings or adjacent positions in the standings are paired.
When the group is odd. Suppose three players have 2 points: Nos. 1, 3 and 5. If there are no other constraints, Nos. 1 and 3 can meet and No. 5 can play the highest-ranked feasible opponent in the next score group. Check that the two groups still pair, and that No. 5 has not met that opponent. No. 5’s score stays 2; only the opponent’s score differs. The lowest-rated eligible rated player is the usual starting point, not an automatic choice.
Color history matters. A player with White, White, Black is due Black in the next round under the usual US Chess balancing logic. White would alternate the last color but leave the overall balance worse. Unplayed rounds do not contribute colors. Rule 29E5 normally sets an 80-point limit on certain changes to improve ordinary color allocation and a 200-point limit for certain changes to reduce a two-or-more color imbalance; check the rule’s calculation and exceptions. Those limits do not turn a rematch into an acceptable default or apply to every switch needed to make score groups pair.
Example: Four equal scorers, ranked 1–4, have ratings 2100, 2040, 1800, 1740. Nos. 1 and 3 need White, and Nos. 2 and 4 need Black. No one has met before. The natural pairings give both pairs a color conflict; swapping Nos. 3 and 4 (a 60-point difference) allows 1–4 and 3–2, White first.
Byes and corrections. A pairing-assigned bye is not the same as an advance request for a half-point bye, and neither supplies an opponent or color. The full-point bye in later rounds ordinarily goes to the lowest-rated eligible player in the lowest score group. Check entered results, withdrawals, and late entries before publishing. US Chess has exceptions for exceptional situations such as fields too small to avoid repeats and some unplayed forfeits.
Source: US Chess Official Rules, Chapter 2, Rules 22 and 27–29.
1. Swiss: FIDE Dutch pairing logic
An uncomplicated first round in FIDE Dutch can look like a US Chess first round. The underlying decision process is different. The current Dutch rules prescribe the order in which candidate pairings are generated and which criteria decide among them.
- Set the initial order. Each player has a tournament pairing number (TPN). Put players in descending score order and use ascending TPN within a scoregroup. A bracket contains the current group’s residents, plus any players moved down from above. A bracket with more than one score is heterogeneous.
- Build the first candidate. In a homogeneous bracket, take the first block of players (S1) and match them in order against the rest (S2). In a mixed-score bracket, first try to pair the eligible incoming players against residents. Pair the residents left over as a separate remainder. A player who cannot be paired in this bracket may move down again.
- Apply the criteria in order. No rematches, no ineligible repeat bye, and no meeting between two non-topscorers who have the same absolute color preference. A choice cannot leave an impossible lower remainder. Among feasible outcomes, the criteria address the bye recipient’s score, how many players must move down and which scores move down, the next bracket, unplayed games for an eventual bye, colors, then recent floats and associated score differences.
- Search and allocate colors. Try the rulebook’s ordered S2 transpositions and then subgroup exchanges in a homogeneous bracket. Mixed brackets have additional steps. Once opponents are chosen, grant both color preferences when possible; then apply the stronger preference and the remaining prescribed tie rules. The initial draw and TPN parity resolve cases not settled by the earlier rules.
Worked color conflict. Four players on the same score have TPNs 1 through 4. Nos. 1 and 3 have played White twice and absolutely prefer Black; Nos. 2 and 4 have played Black twice and absolutely prefer White. Assume no prior encounters and that the final-round topscorer exception does not apply. The natural 1 vs. 3 and 2 vs. 4 pairings conflict. Transposing S2 gives 4–1 and 2–3, White first. Each gets the required color and the bracket pairs without a float.
An absolute preference can arise from a color imbalance of at least two or from playing the same color in the last two played games. A strong preference arises from a one-game imbalance when it is not absolute; a mild preference comes from balanced history and usually calls for alternating the last color. In the Dutch definition, a topscorer has more than half the maximum score available before the final round. The special final-round color rules for these players do not cancel the ban on rematches.
Which Swiss am I playing? Dutch is one FIDE system, not another name for every FIDE Swiss. Dubov, Burstein and Lim are other FIDE systems. Use the announced system, current rules and appropriate approved software. Do not apply the US Chess rating limits to a Dutch pairing search. In dual-rated events, confirm the pairing system and any variation before advertising.
Sources: FIDE Swiss basics C.04.1 · General handling C.04.2 · Dutch C.04.3, arts. 1–5 · Technical Commission annotations.
1. Swiss: accelerated systems
Acceleration changes the early opponent mix, usually to bring leading contenders together sooner when the field is large relative to the number of rounds. It changes whom you play, not what you scored. It can be useful with a wide range of playing strength; it is not a guarantee against ties or automatically appropriate in a narrow rating section.
US Chess Rule 28R: three approaches
| Method | Round one | Round two; then reset |
|---|---|---|
| Added score (28R1) | Give the upper half one virtual point after removing byes. Pair on the resulting scores. | Keep the same virtual point for pairings. Remove it before round three. |
| Adjusted rating (28R2) | Split into quartiles A, B, C, D. Pair A vs. B and C vs. D. | Upper winners pair internally; upper non-winners meet lower non-losers; lower losers pair internally. Apply temporary draw-rating adjustments and group balancing. Resume normal pairing in round three. |
| Sixths (28R3) | Split into six bands. Pair 1 vs. 2, 3 vs. 4, and 5 vs. 6. | The best and worst streams pair internally; the two middle streams cross adjacent bands according to prior results. |
In 28R2, upper-band drawers get a temporary 100-point increase and lower-band drawers a 100-point decrease for ordering in round two. The rule also explains how to move players if the middle groups differ in size. In 28R3, the four streams are: winners of 1–2 internally; non-winners of 1–2 vs. winners of 3–4; non-winners of 3–4 vs. winners of 5–6; and non-winners of 5–6 internally. These are pairing tools, not official rating changes.
Eight-player added-score example. Round one becomes 1 vs. 3, 2 vs. 4, 5 vs. 7 and 6 vs. 8. If the higher seed wins each game, the round-two pairing scores are 2 for Nos. 1 and 2; 1 for Nos. 3–6; and 0 for Nos. 7 and 8. The initial opponents to test are 1 vs. 2, 3 vs. 5, 4 vs. 6 and 7 vs. 8, subject to the normal pairing adjustments. No. 3’s actual score is still 0 and No. 5’s is 1.
FIDE Baku acceleration
Assign the first half of the initial field, rounded upward to an even number, to Group A; all other players are Group B. In nine rounds with standard scoring, Group A gets +1 for pairing in Rounds 1–3 and +½ in Rounds 4–5; Round 6 onward uses real scores only. Group B never receives the bonus. A Group A player on 2½ before Round 4 pairs on 3, but still has 2½ in the standings. The FIDE rule gives the rounding formula, late-entry treatment, and rules for other event lengths. Announce the method in advance.
Sources: US Chess 28R · FIDE C.04.7 Baku acceleration.
2. Round robin: circle, Berger and Crenshaw–Berger
In a single round robin, every player meets every other player exactly once. With an even field of n players, schedule n − 1 rounds. With an odd field, schedule n rounds; each player sits out once. Each plays n − 1 games, and the completed section contains n(n − 1)/2 games.
The circle method generates opponents. Fix one position and rotate the others. Pair the fixed position with the round’s anchor, then pair players equally far from the anchor in opposite directions around the ring. For an odd field, add a dummy position; its opponent sits out. A rotation supplies opponents, but by itself it does not specify colors or which rotation should come first.
FIDE Berger example: six numbered places, White first. The fixed No. 6 meets Nos. 1, 4, 2, 5 and 3 in order, and alternates colors. If there are only five players, mark No. 6 as the dummy; those five games become individual sit-outs.
| Round | Board A | Board B | Board C |
|---|---|---|---|
| 1 | 1–6 | 2–5 | 3–4 |
| 2 | 6–4 | 5–3 | 1–2 |
| 3 | 2–6 | 3–1 | 4–5 |
| 4 | 6–5 | 1–4 | 2–3 |
| 5 | 3–6 | 4–2 | 5–1 |
The US Chess name is Crenshaw–Berger. Rule 30A calls them the Crenshaw tables and points to Chapter 12. In an ordinary US Chess round robin, draw the pairing numbers and use the prescribed rows. Rule 30E also refers to the Crenshaw–Berger withdrawal tables to rebalance colors when applicable. For example, the six-player Table B opening opponents cited in Rule 29L are 1 vs. 2, 3 vs. 6 and 5 vs. 4. Compare that with the Berger opening row above. Use Chapter 12 for the full U.S. schedule. Check your software’s rotation too: the WinTD manual documents differences for small fields.
Double round robin and withdrawals. Meet every opponent twice, with colors reversed in the return game. FIDE’s Berger annex recommends exchanging the final two rounds of the first cycle to avoid a run of three identical colors across the boundary. A withdrawal can leave several holes; under US Chess 30B, if a player has completed fewer than half of their scheduled games, their completed games still count for rating but are omitted from the prize standings.
Sources: FIDE Berger tables · US Chess 30A–F · US Chess director FAQ.
3. Knockout: how players advance through a bracket
A knockout is a series of matches. The match might consist of one game or a series with a tie-break. A draw in one game does not by itself eliminate either player. The match winner advances; the loser may be out of the championship bracket but could still enter a consolation or placement match if the event offers one.
Seed the bracket. Decide whether entries are sorted by rating, qualified by previous-stage results, or assigned by draw. Announce the method. A fixed bracket puts high seeds in different paths. An event that reseeds instead rebuilds the matchups from the surviving field according to its stated method. An upset therefore can lead to a different opponent in a fixed bracket than it would in a reseeded bracket.
| Eight-seed fixed bracket | First match | Next step |
|---|---|---|
| Upper half, slot A | 1 vs. 8 | A winner plays B winner. |
| Upper half, slot B | 4 vs. 5 | B winner plays A winner. |
| Lower half, slot C | 2 vs. 7 | C winner plays D winner. |
| Lower half, slot D | 3 vs. 6 | D winner plays C winner. |
Suppose seed 8 beats seed 1 and seed 4 advances. In this fixed bracket, seed 8 plays seed 4. The next opponent comes from slot B; the director does not reopen the draw. For six entrants in an eight-slot bracket, one simple plan gives Nos. 1 and 2 byes, and pairs 4 vs. 5 and 3 vs. 6. The organizer must announce bye placement. An advancement bye is not a played game or a Swiss point.
Decide colors and tie-breaks before round one. A two-game match can give each player one White. State how the first color is chosen and how a 1–1 tie is resolved, such as by a prescribed rapid and blitz sequence, then a deciding game if needed. An Armageddon game typically gives White more time while Black advances with a draw; which time odds and how colors are assigned depend on the event. Budget time for the longest permitted tie-break sequence.
Real example: the 2025 FIDE World Cup. Its 206 entrants included 50 seeds who entered in Round 2. The other 156 played in Round 1, producing the 78 winners needed for a 128-player second round. In the initial round, seed 51 met 206, seed 52 met 205, and so on. Later bracket slots were fixed: a lower seed who won took the defeated seed’s place in that path. Two standard games decided the match if the score was unequal; otherwise the announced rapid, blitz and final sudden-death procedure applied. This is an event-specific example, not a universal knockout chart.
Source: 2025 FIDE World Cup Regulations, arts. 4.1–4.3 and 4.6–4.7.
4. Quads and other US Chess round-robin variations
A quad is a round robin within a four-player section, not a miniature Swiss. US Chess Rule 30G normally groups entrants in rating order: the top four form Quad 1, the next four form Quad 2, and so on. Every player in each full quad has three scheduled opponents regardless of early results.
| Round | Preferred US Chess quad, Rule 30G | FIDE Berger four-player example |
|---|---|---|
| 1 | 1–4 and 2–3 | 1–4 and 2–3 |
| 2 | 3–1 and 4–2 | 4–3 and 1–2 |
| 3 | 1 vs. 2 and 3 vs. 4; toss for colors | 2–4 and 3–1 |
A dash in this table gives White first. The Rule 30G sequence normally numbers players by rating, though some directors draw lots. The last-round toss does not change the opponents. Notice what the US Chess sequence does: the two highest-rated players are scheduled to meet in the final round, whether they are leading or not.
What if 14 players arrive? Two four-player sections plus a six-player, three-round Swiss at the bottom is an option under 30G. Announce the bottom format rather than calling it a quad. Rule 30G also describes a five-player round robin if everyone agrees, with four games per player and one sit-out, or a short Swiss among five to seven lower players. An even Swiss field avoids that predictable sit-out problem.
Small Swiss with a round-robin table (29L). The event can remain a Swiss even if the director borrows a round-robin chart to avoid unnecessary repeats. Pair round one as a Swiss, map those opponents to the chart, then use an unused row that gives the leader the proper Swiss opponent when possible. Retain Swiss color rules and fall back to ordinary Swiss pairing if the roster changes. The nearby 29L1 variant starts with adjacent ranks, 1 vs. 2, 3 vs. 4, and so on, rather than splitting the group in half. Neither procedure is a standard quad.
The Holland system is another name you might be remembering. In US Chess 30H–I it means round-robin preliminaries followed by finals, usually round robins as well. For example, divide players into four balanced groups and qualify the top two from each to an eight-player final. The Unbalanced Holland variant forms rating-strength pools and assigns different qualification places. Publish who advances, how ties are resolved, and whether anything carries over. US Chess Holland is neither FIDE Dutch Swiss nor Scheveningen.
Sources: US Chess 29K–L and 30G–I · FIDE Berger tables.
5. Scheveningen: everyone plays the other team
In a Scheveningen, every member of Team A faces every member of Team B. Nobody plays a teammate. If each team has m players, the event can run in m rounds on m boards, with m² games. Compare that with a regular four-board team match, where corresponding boards may meet just once.
Build the opponent rotation. Keep A1–A4 in fixed slots. In Round 1, line up B1–B4 across from them; in each successive round shift the B list by one place, wrapping at the end. Then assign colors separately. This example has two Whites and two Blacks per player and splits colors 2–2 between the teams in each round.
| Round | A1’s game | A2’s game | A3’s game | A4’s game |
|---|---|---|---|---|
| 1 | A1–B1 | B2–A2 | A3–B3 | B4–A4 |
| 2 | A1–B2 | B3–A2 | A3–B4 | B1–A4 |
| 3 | B3–A1 | A2–B4 | B1–A3 | A4–B2 |
| 4 | B4–A1 | A2–B1 | B2–A3 | A4–B3 |
White is listed first. A1 plays B1, B2, B3 and B4; B1 plays A1, A4, A3 and A2. The colors remain balanced for each, even though the opponent rotation alone does not enforce that. Larger or odd-sized teams call for a color table suited to the roster. With three games, the best individual balance is usually two of one color and one of the other, not an equal split.
Semi-Scheveningen. For two teams of eight, split each into two four-player bands. The top four on each side play the other side’s top four, and the bottom four do the same against their band. That fits in four rounds, but players no longer face everyone on the other team.
Decide how to score it. If both team and individual awards matter, state how game scores contribute and how ties are handled. If A scores 2½ of 4 in one round, B scores 1½, but whether that means two team match points or just 2½ game points depends on the regulations. Do not infer the team scoring from the opponent rotation.
Source: 2026 FIDE Arbiters’ Manual, Chapter 4 §3, pp. 110–111.
6. Schiller: cross-play among several groups
The Schiller format extends the Scheveningen idea to more than two groups. Each player meets everyone outside their own group and never meets a teammate. In a four-team event with three players per team, each player has nine opponents, compared with eleven in a twelve-player round robin. The labels may serve only to define opponents; some historical events ranked individuals rather than teams.
Build it from team meetings, then rotate the boards. For four teams, cycle through A vs. B with C vs. D, A vs. C with B vs. D, then A vs. D with B vs. C. Run that cycle three times. The first time two teams meet, match slots 1 to 1, 2 to 2, and 3 to 3. The next time shift the second team’s slots by one; the third time shift by two. This covers every cross-group opponent exactly once.
| Round | First team meeting: three games | Second team meeting: three games |
|---|---|---|
| 1 | B1–A1 · B2–A2 · B3–A3 | C1–D1 · C2–D2 · C3–D3 |
| 2 | C1–A1 · A2–C2 · A3–C3 | D1–B1 · D2–B2 · D3–B3 |
| 3 | A1–D1 · A2–D2 · D3–A3 | B1–C1 · B2–C2 · C3–B3 |
| 4 | A1–B2 · B3–A2 · A3–B1 | C1–D2 · C2–D3 · D1–C3 |
| 5 | C2–A1 · A2–C3 · A3–C1 | D2–B1 · B2–D3 · B3–D1 |
| 6 | A1–D2 · D3–A2 · D1–A3 | B1–C2 · C3–B2 · C1–B3 |
| 7 | B3–A1 · A2–B1 · B2–A3 | D3–C1 · C2–D1 · D2–C3 |
| 8 | A1–C3 · C1–A2 · A3–C2 | B1–D3 · D1–B2 · B3–D2 |
| 9 | A1–D3 · D1–A2 · D2–A3 | C3–B1 · B2–C1 · C2–B3 |
Original worked schedule; White first. It has 54 games, no repeated opponents, four or five Whites per player, and no run of three of the same color. The four teams each receive 13 or 14 Whites. These are checks on this schedule, not universal Schiller pairing rules. Equal groups of m players across k teams give each player (k − 1)m opponents. Do not assume this is also the number of calendar rounds when the total roster is odd or group sizes differ.
The organizer’s account of the 27th North American Masters discusses different ways to distribute colors in a real Schiller event. The 2026 FIDE Arbiters’ Manual, Chapter 4 §4 provides another sample table.
Choosing a format and checking eligibility
For a large field with limited rounds, start with a Swiss. For a small, fixed roster, use a round robin; if you want short, similarly rated sections, use quads. Choose a knockout when advancement by head-to-head match is the point of the event. Choose Scheveningen or Schiller when the purpose is to compare different groups rather than pair players by score.
Ratings, title norms, and eligibility are different
Since March 1, 2024, Schiller and Scheveningen have not been on FIDE’s ordinary list of formats for player title norms. That list specifies Swiss, round robin, double round robin, and knockout. The FIDE Qualification Commission describes a narrow application route for qualifying federation-run events or events directly between federations. A club should not promise norms from a cross-play format without prior approval. A rating report is a separate question: the Commission distinguishes qualifying played games between already-rated players from games proposed for an unrated player’s initial rating in these formats. Check the applicable regulations and any approval before announcing the event.
Sources: FIDE Title Regulations §1.4.2(e) · Qualification Commission’s format notice · 2026 Arbiters’ Manual, title rules commentary, p. 210.
Before posting pairings, check the whole round
- In a Swiss, confirm the score, opponents already played, color history, bye eligibility and the announced system. An odd scoregroup is not a reason to give someone a bye if everyone can still be paired.
- In a fixed schedule, check each player appears once per round, required opponents occur the right number of times, prohibited opponents never occur, and colors are balanced as intended.
- In a knockout, check the two winner paths feeding each match, not just the seeding list. Announce tie-break and color rules early enough that players know them before deciding how to approach a match.
The pairing that surprises a player is usually the one worth explaining. Say whether the opponent came from the scoregroup, the fixed table or the bracket. Then explain which rule made the natural-looking alternative unavailable. That is more useful than telling a player that the computer made the pairings.
